Docomo FOMA N601i, Manual, Page: 58 / 469

55 Making/Receiving Phone Calls
■ Redial/Dialed calls icons
<186/184>
Showing/Hiding Your Caller ID For Individual Calls
If the other party’s phone supports caller ID display, you can show your phone number (caller ID) on
the other party’s phone (display) when making a voice or videophone call. Since your caller ID is
important information, be careful when disclosing it.
Adding the 186/184 prefix to the other party’s phone number
To show your caller ID each time you make a call, add the “186” prefix to the phone number to dial. To
hide your caller ID, use the “184” prefix.
d
Dialing with the “186” or “184” prefix is disabled for international calls. To make them, select “Notify Caller
ID” from the function menu.
→ p.47
■
To show your phone number
Voice calls: 186 - (the other party’s phone number) -
r
Videophone calls: 186 - (the other party’s phone number) -
o
( )
■
To hide your phone number
Voice calls: 184 - (the other party’s phone number) -
r
Videophone calls: 184 - (the other party’s phone number) -
o
( )
e If you hear a message requesting your caller ID, dial the number again using the “186” prefix.
e
If you make a call with “186” or “184”, the phone number including this prefix is logged in the Redial or Dialed calls record.
<Pause dial>
MENU84
Sending Push Signals Quickly
Sending push signals from your FOMA terminal enables you to send messages to QUICKCAST
*
or to
use services such as ticket ordering and bank balance requests.
Storing dialing data in Pause dial
You can store dialing data to send as push signals beforehand into Pause dial. Inserting a pause (p)
into the dialing data allows you to send data with a separation where a pause lies.
d
You can store one dialing data entry, consisting of up to 128 characters.
d
Dialing data can contain numbers from 0 to 9, the # and
*
symbols, and pauses (p).
d You cannot enter pauses (p) in succession or at the beginning of the dialing data.
Icon Description Icon Description
Voice call International videophone call
International call Packet communication call
Videophone call 64K data communications call
Function Description Refer to
Caller ID Notification Sets whether to show your caller ID when making a call. p.44
184/186 Uses the 184 and 186 prefixes to specify whether to show your caller ID every time you
make a call.
p.55
Notify Caller ID Accesses the function menu to specify whether to show your caller ID every time you
make a call.
p.47
NOTE
Ｖ．ｐｈｏｎｅ
Ｖ．ｐｈｏｎｅ
Continued on next page