Docomo FOMA N601i, Manual, Page: 91 / 469

88 Making/Receiving Videophone Calls
2
To end the call, press
y
■ To continue i-mode communication
Even when “V-phone while packet” is set to “V-phone priority”, you can continue using i-mode communication
by selecting “Call Rejection”, “Call Forwarding” or “Voice Mail” from the function menu of the videophone
ringing screen.
Videophone ringing function menu → p.82
Connecting to an External Device to Make and Receive Videophone Calls
You can make and receive videophone calls using an external device such as PC by connecting it to
the FOMA terminal with the FOMA USB Cable (optional).
To enable this function, install a videophone application in a PC or other exclusive device and prepare
equipment such as an earphone/microphone and USB-compatible Web camera (marketed) that will
be connected to the PC.
d
For information about the operating environment, setting and operation of a videophone application, see
the instructions provided with an external device.
d
“ ドコモテレビ電話ソフト 2005” (DoCoMo Videophone Software 2005) is available as an application for
this function. This application can be downloaded on the following site: (for details about using in PC,
check the support page on the website.
e
You cannot make a videophone call using an external device during a voice call.
e If you subscribe to the “Call Waiting” service and receive a videophone call from an external device during a voice
call, you can answer the videophone call after ending the voice call. For a voice call, videophone call or 64K data
communication call received from an external device during a videophone call, the FOMA terminal acts in the same
way.
<Remote monitoring>
Viewing Distant Locations Using FOMA Terminal
Remote monitoring is only available between FOMA terminals or between a FOMA terminal and a
phone equipped with the 3G-324M-compatible videophone function. Your FOMA terminal can be
used as either of a dialing or receiving phone for remote monitoring.
d
Remote monitoring can only be carried out when the phone number of the monitoring phone is stored
beforehand in the phone receiving the remote monitoring and Remote monitoring is set to “ON”.
Preparing the receiving phone
Set the phone number of the dialing phone (Other ID) and delay until the remote monitoring begins
(Ringing time) on the phone receiving the remote monitoring.
d
Up to 5 IDs can be stored.
NOTE
Default setting Other ID: Not recorded Ringing time: 5 sec. Set: OFF
http://videophonesoft.nttdocomo.co.jp/ (Only in Japanese)
Base station
FOMA videophone
Connection speed:
64K or 32K
FOMA
network