Docomo FOMA N601i, Manual, Page: 328 / 469

325 Entering Text
■ The numbers of characters remaining and entered
Characters shown on the text entry (edit)
screen are counted according to the rules listed
below. On the text entry (edit) screen, the end
mark “
” appears as an approximate guide
indicating that you can enter characters up to
the location in the current function.
d A single-byte character is counted as 1
byte and a double-byte character is
counted as 2 bytes.
d A double-byte character is equal to two
single-byte characters.
Double-byte: ＡＢＣＤＥ
5 characters (counted as 10 bytes)
Single-byte: ABCDEFGHIJ
10 characters (counted as 10 bytes)
■ Character combinations
Take care with character combinations when
entering text.
<Example> Entering “
ﾄ゛ｺﾓ ” in single-byte
kana input mode and “
の携帯電話
” in
Kanji/hiragana input mode
d
Single-byte dakuten “ ゛ ” and han-dakuten
“ ゜ ” are each counted as 1 character.
■
Scrolling
On the text entry (edit) screen, use
c
to
scroll by line, and
s
(MEMO/CHECK) and
a
(
@
) to scroll by page.
On the conversion candidate list screen, use
c
to scroll by line, and
v
or
s
(MEMO/
CHECK) and
a
(
@
) to scroll by page.
Selecting the text entry method
There are three methods to enter text:
c
Mode 1(5-touch)
→
p.325
Several characters are assigned to a key, and a
character being entered changes each time you
press the key.
c
Mode 2(2-touch)
→
p.326
Characters are entered using a combination of
two number keys.
c
Mode 3(T9 input) → p.326
Candidates assigned to a key appear each time
you press the key, and you can select any of the
candidates.
1
i
X “Settings” X “Other settings”
X
“Character input set”
X
“Input
mode” X Select any item
d
Changing the text entry method
while entering text
When the text entry (edit) screen appears, your
preferred text entry method is selected. There
are 2 ways to change to another method.
c
Switching the text entry method is only a
temporary change. Once you end the text entry
then display the text entry (edit) screen, your
preferred text entry method is reselected.
c
The text entry method may not be switched for
some specific text entry such as zip code.
■ Using the function menu
“CHG input method“ under the text entry (edit)
function menu
→ p.332
■
Pressing
o
(PI
･
SB) for 1 second or
longer
The text entry method changes in “Mode 1(5-
touch)”
→
“Mode 2(2-touch)”
→
“Mode 3(T9
input)” order each time you press and hold
o
(PI ･ SB) for 1 second or longer.
Selecting the font size
c
Select “Small”, “Standard”, “Large 1” or “Large 2”
for the font size used on the text entry (edit)
screen.
1
i
X “Settings” X “Other settings”
X “Character input set” X “CHG
input size” X Select any item
NOTE
e
You can also change the font size referring to the
“Character size” in Changing the font” column(p.128).
Entering text in Mode 1
(5-touch)
c
Key Assignment (5-touch input) → p.346
d
Changing the input mode
1
Text entry (edit) screen
(p.324)
X
u
The input mode changes in “Alphabetic (single-
byte)”
→ “Numeric (single-byte)” → “Kanji/hiragana
(double-byte)”
→
“Kana (single-byte)” order each
time you press
u
(Selecting “Full pitch” from the
function menu allows you to use double-byte when
changing the input mode).
Default setting Input mode: Mode 1(5-touch)
ﾄ ゛ ｺ ﾓ の 携 帯 電 話
(9 characters when
shown on the screen)
1 1 1 1 ２ ２ ２ ２ ２ (count as 14 bytes,
equivalent to 14
single-byte characters)
̲ ̲ ̲ ̲ ＿ ＿ ＿ ＿ ＿
MENU35
Default setting CHG input size: Standard
MENU35