Docomo FOMA N601i, Manual, Page: 118 / 469

115 Tone/Display/Lighting Settings
e
To enable “Mail”, “Chat mail”, “MessageR” and “MessageF” in “Vibrator”, set the respective items in “Mail/Msg. ring
time” to “ON”.
e
When “Vibrator” is set to other than “OFF”, take care not to let the vibrating FOMA terminal get close to fire (e.g.
space heater) or fall off a table, etc.
e
When “Ring volume” is set to other than “Silent” and the vibrator is set, a FOMA terminal uses a ring tone and
vibration to notify you of incoming calls. When “Ring volume” is set to “Silent”, a FOMA terminal uses vibration only.
e
The vibration level is always fixed regardless of the ring volume setting.
e
When “Melody linkage” is set, the vibration pattern may not match the main theme.
<Vibrator priority sequence>
e
Priority is assigned as follows for the vibrator when the incoming settings are duplicated.
①
Vibration setting for Discern connect
→
p.105
②
Vibration setting for Discern group
→
p.105
③ Vibrator setting
<Keypad sound>
MENU30
Setting the Keypad Tone
d
Setting this function to “OFF” also disables the following tones:
a Warning tones a Battery low warning tone
a The tone emitted when you start adjusting the volume a Alarm clock snooze release tone
d The keypad tone sounds at the level set in “Volume” during a call, and fixed at the same level while not on
a call.
d
The confirmation tone sounds regardless of this setting when:
a
You press
s
(MEMO/CHECK) with a FOMA terminal folded
a
You shoot a picture (shutter sound)
a
You start/finish memo playback (the sound emanates from the receiver)
a
You start/finish standby voice memo and voice announce recording (the sound emanates from the
receiver)
d
When setting the keypad tone in “Initial setting” (p.43), select “ON” or “OFF”.
1
i
X “Settings” X “Other settings” X “Keypad sound” X “ON”
■ To prevent a FOMA terminal from emitting the keypad sound
X
“OFF”
<Charge sound>
Setting the Confirmation Tone for FOMA Terminal Charging
This function allows you to set a FOMA terminal to emit a short double-beep (“bibip”) when charging
starts and ends so that you do not leave the FOMA terminal charging indefinitely.
d
The confirmation tone does not sound regardless of this setting when:
a
You are dialing
a
You are receiving a call
a
You are on a voice call
a
Manner mode is set
a
Public mode (Driving mode) is set
a
Standby voice memo is being recorded
a
Voice announce is being recorded
a
Data is sent or received
a
A FOMA terminal is turned off
a
The screen is not standby
1
i
X
“Settings”
X
“Other settings”
X
“Charge sound”
X
“ON”
■
To prevent a FOMA terminal from emitting the charge sound
X “OFF”
<Clock Alarm Tone set>
Setting the Clock Alarm Tone
This setting enables you to change the clock alarm tone set for Alarm clock, Schedule, To Do list, etc.
1
i
X
“Settings”
X
“Clock”
X
“Clock Alarm Tone set”
X
Select any item
NOTE
Melody X Select a folder
Selects a ring tone or melody. → p.112
Default setting
ON
Default setting
ON
Default setting
Alarm Tone
Continued on next page