Docomo FOMA N601i, Manual, Page: 363 / 469

360 Appendix/External Devices/Troubleshooting
“No content is available (204)”
d
This message appears when there is no data to display on the site.
−
“No data”
d
This message appears when there is no phonebook entry that
matches the search conditions when you perform Phonebook
search. p.97
(During infrared data exchange)
“No response Retry?”
d
The receiving terminal cannot be found/detected. Place the
terminals so that their infrared data ports face each other. Select
“YES” and press
d
to try again.
p.277
“No response (408)”
d
No response has been received from the site and the
communication is interrupted. Retry connection. −
“No Switch”
d
This message appears when you cannot switch to a videophone call
during a voice call because the other party is establishing a packet
communication (including i-mode). Check the other party’s status
and retry. p.48
“Other function active Cannot
start”
“Other function active Cannot
operate”
d
This message appears when you attempt to perform an unavailable
operation but another function is running. −
“Out of service area”
d
This message appears when you attempt to use an i-mode service
out of range or in a location where radio waves do not reach you.
Move until “
” appears, then use the i-mode service.
p.180
“Page is not found (404)” d The site is not found. It may not exist.
−
“Password is not correct (401)”
d
This message appears when the authentication did not go through on
the “Authentication” or “Re-authentication” screen. To re-authenticate,
select “YES”.
−
“PIN1 code blocked” d This message appears when the power is turned on during PIN1
code lock. Press
d
to display the PUK code entry screen, then
enter the PUK code correctly to release the lock.
p.140
“Please wait for a while (packet)”
d
The packet communication device may be malfunctioning. Otherwise,
the packet communication network may be congested. Retry later.
−
“Please wait” d The voice line or packet communication device may be
malfunctioning. Otherwise, the voice line/packet communication
network may be congested. Attempt to use a voice call, videophone
call or i-mode later.
You can still make an emergency call (110, 119 and 118). However,
you may not be connected depending on the condition.
−
“PUK blocked”
d
This message appears when you attempt to power on or perform
operations related to the FOMA card (UIM) when the PUK code is
blocked. Contact the DoCoMo service counter. p.139
“Reading UIM Cannot start” d This message appears when you attempt to perform an operation
related to the FOMA card (UIM) while the FOMA card (UIM) is being
read. Retry later.
−
“Receiving failed Channel
information cannot display”
d
This message appears when you display the channel list screen for
the first time after purchase or when you attempt to display the
channel list screen after changing the i-channel host URL, initializing
the FOMA terminal or exchanging the FOMA card (UIM), and then if
i-channel information cannot be obtained. Move until “ ”
appears, then retry to display the channel list screen.
p.204
“Replay period has expired
Delete?”
d
This message appears when you attempt to play i-motion whose
playback period has expired. Select “YES” to delete the i-motion.
−
“Replay period has expired” d This message appears when you select a desktop icon for i-motion
whose playback period has expired.
−
“Root certificate has expired Do
you connect?”
d
This message appears when an SSL server certificate out of the
validity period has been received. To connect, select “YES”.
Otherwise, select “NO”.
d
This message appears when you are asked to send a client
certificate while accessing an SSL website.
p.198
p.183
Error Message Explanation and Solution Refer to