Docomo FOMA N601i, Manual

Page: 435 / 469

29
Access Point Name (APN) Settings
Set up the access point (APN) for packet communication. You can set up to 10 destinations and
administer them by registering them into cid (Registration Numbers) 1 through 10.
d
As the APN of mopera “mopera.ne.jp” is assigned to cid1 and APN of mopera U “mopera.net” to
cid3 by default, assign the APN to cid2 or between cid4 to cid10.
1
After starting “FOMA PC setting
software”, click “
接続先（
APN
）
設定 ” (Set up Access point
(APN))
2
Click “OK” on the FOMA terminal settings acquisition screen
Automatically accesses the connected FOMA terminal and reads the registered Access point (APN)
information.
It does not start if no FOMA terminal is connected.
3
Set up the access point (APN)
Adding/Editing/Deleting the Access point (APN)
a To add an access point (APN)
Click “ 追加 ” (Add) on the “ 接続先（ APN ）設定 ” (Set up Access point (APN)) screen.
a
To edit a registered access point (APN)
Select the applicable access point (APN) from the list and click “
編集
” (Edit) on the “
接続先（
APN
）設定
”
(Set up Access point (APN)) screen.
a
To delete a registered access point (APN)
Select the applicable access point (APN) from the list and click “ 削除 ” (Delete) on the “ 接続先（ APN ）設
定
” (Set up Access point (APN)) screen.
You cannot delete the access point assigned to cid1 and cid3 (Even if you select cid3 and click “ 削除 ”
(Delete), the access point is not deleted and remains “mopera.net”).
Saving in File
If you want to back up the access point (APN) settings registered on the FOMA terminal and/or save the
access point (APN) settings being edited, you can save the access point (APN) settings by setting from the
“
ファイル ” (File) menu of the toolbar.
Reading from File
If you want to edit the saved access point (APN) settings and/or write into the FOMA terminal, you can read
the access point (APN) settings saved on the PC by operating from the “
ファイル ” (File) menu of the toolbar.
Writing Access point (APN) information into FOMA terminal
Clicking “FOMA 端末へ設定を書き込む ” (Write settings into FOMA terminal) on the “ 接続先（ APN ）設定 ”
(Set up Access point (APN)) screen allows you to write the displayed access point (APN) settings into the
FOMA terminal.