Docomo FOMA N601i, Manual

Page: 131 / 469

128 Tone/Display/Lighting Settings
<Illumination in talk>
Specifying How the Incoming Call Lamp Flashes During a Call
This function allows you to set the color in which the incoming call lamp flashes during a voice or
videophone call.
1
i
X
“Settings”
X
“Talk”
X
“Illumination in talk”
X
Select a color
OFF: The incoming call lamp does not flash.
Color 1 to 7: The lamp flashes in the selected color.
Gradation 1: The lamp slowly flashes changing the color.
Gradation 2: The lamp lights up changing the color.
Gradation 3: The lamp color quickly changes.
e
While a message is recorded, a recorded message is played or an incoming call is held, the incoming call lamp
flashes in the same pattern as while you are talking.
<Call time display>
MENU48
Having a FOMA terminal Show the Call Time During a Call
Use this function to specify whether to have a FOMA terminal show the call time during a voice or videophone.
d If the call time exceeds “19 hours, 59 minutes, 59 seconds”, the count restarts from “0 seconds”.
d
The shown call time is intended solely as a guide and should not be used as an accurate figure.
d
The call time is not counted during i-mode or packet communication.
1
i
X
“Settings”
X
“Call time/Charge”
X
“Call time display”
X
“ON”
■ To hide the call time
X “OFF”
e
The call time is reset to 0 second every time you switch the call mode between voice and videophone. However, if
you switch the call mode and end a videophone call, the call time shown indicates the total time of the voice and
videophone calls.
<Font>
MENU66
Changing the Font
Use this procedure to customize the font (typeface) of the text shown on a screen.
1
i
X “Settings” X “Display” X “Font” X Select any item
e
The characters of the phone number entry screen are not covered by this function.
e
“Font 2” is only available for alphabetic letters (double-byte or single-byte), numbers (double-byte or single-byte),
hiragana and katakana (double-byte or single-byte), some symbols, Greek letters and Russian letters. All other
characters such as kanji are shown using “Font 1”.
e
Setting “Standard” or “Large” in “Character size” changes the font sizes for all functions subject to “Character size” at a time.
e The font size set in “Phonebook” in “Separate setting” in “Character size” is also applied to the My Profile screen.
NOTE
NOTE
Default setting
Type: Font 1 Thickness: Bold Character size: Standard
Type Selects the font type between “Font 1” and “Font 2”. A sample of the selected font appears on the bottom of the screen.
Thickness Selects the thickness among “Thin” and “Bold”. A text sample using the selected thickness appears on the bottom of the screen.
Character size Sets the font size for the following screens:
Text entry (edit), mail detail, webpage, screen memo, MessageR/MessageF detail, full browser,
phonebook list, phonebook detail and My Profile.
Standard Sets the standard font size.
Large Sets the large font size.
Separate setting Sets the font size for character entry, i-mode, full browser and phonebook.
NOTE
Default setting
OFF
Default setting
ON