DoAll ZV-3620, Instruction Manual

Page: 30 / 37

26
Clamp the Bandwheel and Tire Do-ecurely.
4. Clamp a flat board on top of the bandwheel to keep
the glued portion of the tire in place. If necessary,
clamp the bandwheel down to the table.
5. With two (2) screwdrivers, stretch the tire over
the bandwheelalways keeping one screwdriver
stretching the tire as you move around the rim until
the tire is placed. The other person can be centering
the tire onto the rim as you go.
6. Before the adhesive sets, clean any excess from
the both edges of the bandwheel with solvent.
7. Working time of the adhesive is approximately
twenty (20) minutes and cure time is 24 hours.
BANDWHEEL TIRE REPLACEMENT (Sheet
Metal Bandwheels) (Continued....)