20
LUBRICATION
LUBRICATION CHART
* Lubrication intervals are based on a 8-hour day, 40-hour week.
Lubricate more often with heavier use.
LUBRICATION
POINT NO.
LOCATION DESCRIPTION AND
SERVICE RECOMMENDATIONS
LUBRICATION
INTERVAL*
RECOMMENDED
LUBRICANT
1
Roller saw guides (optional).
One (1) grease fitting
on each roller.
DAILY
Premium quality, multi-purpose, lithium-
based, EP (extreme pressure) grease.
NLGI Grade No. 2.
Union 76, UNOBA EP 2, or equivalent.
2
Linear Rail Bearings (HMD Hydraulic Tables Only).
Grease fittings. Quantity of: 8 for HMD-36; 12 for HMD-
60.
MONTHLY
3
Band Tension Screw and Bearing.
Clean and apply
oil.
MONTHLY
High quality, rust and oxidation-inhibited,
medium hydraulic and general purpose
industrial oil.
ISO-VG Grade 68 (Formerly ASTM
Grade No. 315).
Union 76, UNAX RX 68, or equivalent.
4
Post.
Clean and apply oil.
MONTHLY
5
Upper Bandwheel Slide, Hinge, and Tilt Screw.
Clean and apply oil.
MONTHLY
6
Table Trunnion and Tilt Screw.
Apply oil to tilt
surfaces and threads as required.
MONTHLY
7
Miscellaneous: Slides, Hinges, Pivot Points,
Component Parts, Unpainted Surfaces, Optional
Equipment as Supplied, etc.
Keep clean and apply oil
as required to to maintain proper function, reduce wear,
and corrosion, etc.
CHECK
MONTHLY
8
Electric Motors.
Band Drive, Hydraulic System Pump.
Lubricate (if any) per manufacturer’s recommendations.
9
Upper and Lower Spindle Bearings.
Proper oil level
must be maintained.
CHECK
WEEKLY
High quality #10 spindle oil.
Mobil, Velocite #6, or equivalent.
10
Hydraulic Reservoir (Standard).
2.8 gallon (10.6
liter) capacity. Proper oil level must be maintained.
Drain and refill after first month, every six (6) months
thereafter.
Hydraulic Reservoir (for Hydraulic Table, HMD Table
and/or Hydraulic Band Tension Options).
Ten (10)
gallon (37.8 liter) capacity. Proper oil level must be
maintained. Drain and refill after first month, every six
(6) months thereafter.
CHECK
WEEKLY
Multi-purpose automatic transmission
fluid.
General Motors Dexron III, or equivalent.
11
Band Mist Lubricator (Optional).
Keep filled and
hoses clear.
CHECK WEEKLY
AS REQUIRED
Contact your DoALL sales representative
for the best oils and/or fluids for your
application.
DoALL cutting fluids and/or oils (AL-
2000).
12
Oil-Mist Lubricator (For Optional Roller Saw
Guides).
Keep filled and hoses clear.
CHECK WEEKLY
AS REQUIRED
13
DBW-15 Buttwelder (Optional).
Lubricate as required per DBW-15 Instruction Manual.
Summary of Contents for ZV-3620
