DoAll ZV-3620, Instruction Manual

Page: 3 / 37

i
MODEL FIRST SERIAL NO. LAST SERIAL NO.
ZV-3620 565-03101
PRINTED IN U.S.A.
OPERATOR'S INSTRUCTION MANUAL
METAL CUTTING BAND SAW
DoALL SAWING PRODUCTS
2375B TOUHY AVENUE
ELK GROVE, ILLINOIS 60007 U.S.A.
PB-507.5 (2-10)
The following registered trademarks of the DoALL Company are used in this manual:
DoALL, Dart, Tensigage and Zephyr.
PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATING THE MACHINE!
For Sales, Parts and Service, call 1-888-362-5572
For your information and future reference, pertinent data concerning your machine
should be written in the spaces provided above. This information is stamped on
a plate attached to your machine. Be sure to provide machine model and serial
numbers with any correspondence or parts orders.
Specifications contained herein were in effect at the time this manual was approved
for printing. The DoALL Company, whose policy is one of continuous improvement,
reserves the right, however, to change specifications or design at any time without
notice and without incurring obligations.