DMP Electronics 734N Series, Installation And Programming Manual

Page: 36 / 60

32 734N Series Installation and Programming Guide | Digital Monitoring Products, Inc.
Activate Zone 2 Bypass
Select YES to activate the zone 2 bypass operation. Selecting
NO allows standard zone operation on zone 2. The default is
NO
.
If the door being released by the 734N Series module is
protected (contact installed), a programmable bypass
entry/exit timer can be provided by connecting its contact
wiring to the 734N Series module zone 2. When the
onboard Form C relay activates and the user opens the door
connected to zone 2, the zone is delayed for the number of
seconds programmed in
ZONE 2 BYPASS TIME
allowing the
user to enter/exit during an armed period.
If zone 2 does not restore (door closed) within the
programmed time, the piezo sounds every other second
during the last ten seconds. If zone 2 restores prior to the end
of the programmed time, the piezo silences. If the zone does
not restore before the programmed time, the module ends
the bypass and indicates the open or short zone condition to
the panel.
ACTIVATE ZONE 2
BYPASS?
NO YES