Digital Monitoring Products, Inc. | 734N Series Installation and Programming Guide
23
PROGRAM THE PANEL
To access the Programmer menu, reset the panel, enter
6653
(PROG), then press
CMD
.
After completing each of the following steps, press
CMD
to advance to the next option.
Refer to the panel programming guide as needed.
DEVICE SETUP
Advance to
DEVICE SETUP
, then press a select key or area
to enter the setup menu.
Device Number
Set the module’s address. For information about valid
addresses, refer to Table 2.
Device Name
Press a select key or area, then enter a name for the module.
DEVICE SETUP
DEVICE SETUP
DEVICE NO: ‑
DEVICE SETUP
*UNUSED*
Summary of Contents for 734N Series
Page 1: ...INSTALLATION AND PROGRAMMING GUIDE 734N Series Access Control Modules...
Page 2: ......
Page 59: ......
Page 60: ...LT 1197 20314 1 04 2020 Digital Monitoring Products Inc...
