DMP Electronics 734N Series, Installation And Programming Manual

Page: 43 / 60

Digital Monitoring Products, Inc. | 734N Series Installation and Programming Guide 39
Site Code Display : You can program up to eight 8‑digit site
codes. The site code range is 0 ‑ 16777214.
In the keypad display, enter site code 1 and press
CMD . The
display will ask for site code 2 followed by site code 3 and
so on. When you have selected the site code you want to
change, press
CMD.
Number of User Code Digits
The 734N module recognizes user codes from 4‑12 digits
long. Press any top row select key or area to enter a user
code digit length. This number must match the user code
number length being programmed in the panel. The device
will recommend a number of user code digits based on the
user code length. Default is 5 .
All bits are read and converted into a decimal number string.
The number string is left padded with 0 (zero) if needed for
long user code lengths.
Example:
# decoded 1234567
10 digits 0001234567
4 digits 4567
SITE CODE 1:
NO OF USER CODE
DIGITS:
5