DMP Electronics 734N Series, Installation And Programming Manual

Page: 45 / 60

Digital Monitoring Products, Inc. | 734N Series Installation and Programming Guide 41
Press the third select key or area to choose
ANY
(Any
Wiegand Read). Access is granted when any Wiegand string
is received.
Press the fourth select key or area to choose
ON (Relay
Always On). The relay is always on.
Press
CMD
to display additional actions. Press the first
select key or area to choose LAST (Keep Last State). The
relay remains in the same state and does not change when
communication is lost.
STOP
Press any select key or area to initiate the stop routine. When
programming is saved successfully, STOP displays and the
module returns to the main 734N Menu. Test the module or
remove the keypad harness to disconnect the keypad.
OFF SITE ANY ON
OFF SITE ANY ON
LAST
734N
STOP