DJO Global Artromot Active-K Operating Instructions Manual Download

Page: 55 / 75

glis

6.3.2 Information about the

"Find angle, passive"

coordination protocols

This is the symbol for the "Find angle, passive"

protocol:

The "Find angle" protocol is based on the so-

called angle reproduction test.

With this protocol, the patient is prompted to

press the OK button when the knee reaches a

number of preset angles. The current carriage

position is not indicated on the display in this

case. This exercise is meant to improve the pa-

tient's capabilities to perceive the current knee

joint angle.

This is a passive operating mode.

In all cycles between extension and flexion, the

patient is prompted to indicated the angle. If the

patient believes that the knee angle has been

attained, he is prompted to confirm this with the

OK button. The angle to find is indicated until

the OK button is pressed.

When OK is pressed, the carriage displays the

angle attained and assesses the result in relation

to the angle wanted.

If the deviation is within the tolerance of 10°, the

attempt was successful and a positive feedback

icon is displayed:

If the deviation is outside the tolerance of 10°,

the attempt failed and a negative feedback icon

is displayed:

The number of successful and failed attempts is

permanently displayed for reference.

At the end of the session, the patient can assess

his success and compare it with the previous

session.

If the carriage is stopped with OK, the requested

angle as well as the actual angle are is displayed.

Patient treatment can be resumed by pressing

the OK button. Subsequently, the patient will be

prompted for the next angle.

The carriage indicates the following angles

which must be identified in this order.

30°
15°
60°
45°
0°
90°

The patient will only be prompted for angles

from the current range of motion set at the

carriage. After all possible angle settings have

been displayed, the cycle starts over with the

first angle.

Example:

The currently set range of motion is: 0° / 10° / 60°

The patient is prompted for the following angles

in this order:

30°
15°
45°

Supplied by EME Services Ltd

Summary of Contents for Artromot Active-K












































































Search results

Summary of Contents for Artromot Active-K

Reviews:

Related manuals for Artromot Active-K

Brands by name

Popular brands

DJO Global Artromot Active-K, Operating Instructions Manual

Search results

Summary of Contents for Artromot Active-K

Reviews:

Related manuals for Artromot Active-K

Brands by name

Popular brands