En
glis
h
60
6.3.3 Information about the
"Find angle, active"
coordination protocol
This is the symbol for the "Find angle, active"
protocol:
The workflow of the "Find angle, active" protocol
is similar to that of the "Find angle, passive"
protocol.
The only difference is the operating mode,
which in this case is "active".
This means that patients are required to actively
bend and extend their knee until they believe
that the requested angle has been reached.
Then they press the OK button.
In addition, a resistance can be set and the car-
riage requests an angle with each movement.
With this protocol, the active zone is the entire
range of motion. Further limitations do not
apply.
6.3.3.1 Adjustable parameters
in the "Find angle, active"
protocol
The following treatment parameters can be
adjusted in the "Find angle, active" coordination
protocols:
Passive extension
(stretching) adjustment
Passive flexion (bending)
adjustment
Therapy timer
Warm-up protocol
(passive)
Active adjustment (ROM
- range of motion)
Extension force
Flexion force
Load reversal (passive)
6.3.3.2 Display in the "Find angle,
active" mode
The display is similar to those shown in 6.3.2.3
and 6.3.2.4 (Find angle, passive).
Supplied by EME Services Ltd
