DJO Global Artromot Active-K Operating Instructions Manual Download Page 25

Page: 25 / 75

glis

Muscle stimulation (EMS control)

This special function allows the

ARTROMOT® ACTIVE-K

unit to be operated in

conjunction with the electrical muscle stimulator

ARTROSTIM® FOCUS®plus

for which it is ideally suited.

For this modality, first plug the "muscle stimulation" connection cable (part

no. 2.0037.024) into the ARTROSTIM®-FOCUSplus device (see ARTROSTIM®-

FOCUSplus operation manual) and then into the ARTROMOT® ACTIVE-K unit (see

4.2).

Then activate the EMS control program at the ARTROMOT® ACTIVE-K. Select the

function: the display will show the corresponding symbol and indicates "0 sec"

(the function is disabled). Press the arrow up button to activate the function.

The readout automatically changes to 20 seconds which ensures the optimal

combination with the three preset protocols of the ARTROSTIM®-FOCUS®plus .

At this point, you can change the stimulation period if a special setting was

selected at the EMS device or if you wish to use a longer or shorter stimulation

period.

Confirm the selection with the OK button.

Start therapy by pressing the

START

button. Starting from the middle position,

the carriage will move to the programmed flexion angle, then to the pro-

grammed extension setting. At this point, the carriage will stop and simultane-

ously send a trigger pulse to the ARTROSTIM® FOCUS®plus device. For the dura-

tion of the stimulation period/pause set at the carriage

(default: 20 seconds

the muscle stimulation protocol that you programmed at the

ARTROSTIM®

FOCUS®plus

unit will be completed with the selected intensity (for program-

ming of the EMS device, see:

ARTROSTIM® FOCUS®plus

operation manual).

After the pause, the

ARTROMOT® ACTIVE-K

will turn off the EMS device and the

carriage moves to the programmed maximum flexion angle.

The electrical muscle stimulation will be repeated in the next extension pause.

Note

–

In addition

to activating the special function "EMS control" you can adjust

the extension and flexion pauses separately and independently of the

stimulation period.

– Electrical muscle stimulation can

only

take place during

extension

pauses

– If an additional extension pause has been programmed, it will take place

after each stimulation phase.

– During the set pause/stimulation period, the

ARTROSTIM® FOCUS®plus

electrotherapy unit operates independently of this setting. If a setting dif-

ferent from the default setting of the carriage or of the stimulation param-

eters of the electrotherapy unit is desired, the desired therapy parameters

must be set at the

ARTROSTIM® FOCUS®plus

Caution!

Patient hazard—The only approved device for electrical muscle stimulation

is the ARTROSTIM®-FOCUSplus® muscle stimulator with EN 60601-1 approval,

manufactured by ORMED GmbH (manufacturer: Empi, Inc. USA).

Supplied by EME Services Ltd

Summary of Contents for Artromot Active-K












































































Search results

Summary of Contents for Artromot Active-K

Reviews:

Related manuals for Artromot Active-K

Brands by name

Popular brands

DJO Global Artromot Active-K, Operating Instructions Manual

Search results

Summary of Contents for Artromot Active-K

Reviews:

Related manuals for Artromot Active-K

Brands by name

Popular brands