DJO Global Artromot Active-K Operating Instructions Manual Download Page 28

Page: 28 / 75

glis

Extension force range

The force range can only be set for the functions "Maintain force, static" and

"Maintain force, dynamic".

With these functions, the patient is prompted to maintain a random force for

3 seconds while the carriage is moving in the extension direction.

The range from which the force will be selected, is set under Extension Force

Range. The parameters to define are the intensity and direction of the force.

The force range can be adjusted between -30 kg and +30 kg in steps of 1 kg.

Adjustable values:

0 kg =

passive mode, extension The patient is not required to

exercise actively.

1 to 30 kg =

limits of the force range from which a random resistance

is selected that the patient is required to overcome

actively in the direction of motion (push) so as to move

the carriage in the extension direction.

-1 to -30 kg =

limits of the force range from which a random resistance

is selected that the patient is required to overcome

actively opposite to the direction of motion (pull) so as

to move the carriage in the extension direction.

Note

– The option "Hi limit = Lo limit" means that the same force setting is perma-

nently set and that the requested force will not alternate.

– It is not possible to select a setting beyond 0 (one positive and one nega-

tive value). During extension, the patient is always required either to push

in the direction of motion or to pull opposite to the direction of motion.

Supplied by EME Services Ltd

Summary of Contents for Artromot Active-K












































































Search results

Summary of Contents for Artromot Active-K

Reviews:

Related manuals for Artromot Active-K

Brands by name

Popular brands

DJO Global Artromot Active-K, Operating Instructions Manual

Search results

Summary of Contents for Artromot Active-K

Reviews:

Related manuals for Artromot Active-K

Brands by name

Popular brands