dixell xweb 5000, Operation Manual, Page: 52 / 115

XWEB5000 Operation Manual
52/115 1592010600
Click on “Cancel”.

Advanced function
The “Advanced” key allows to reach another configuration area dedicated to the instrument setup.
This area is very dangerous because this configuration defines important features that can badly affect the
result if not properly set.
Take care of this advise and ask authorised personnel before trying any kind of setting.
You can find more complete information in Appendix A.
3.3.4.6 CLONE FUNCTION
This function is intended to let the user save a lot ot time during the first setup of the XWEB.
By using “clone” button the system will broadcast the current instrument setup to all the other that are
compatible. The compatible instruments are only the ones who belong to the same model. In this situation the
user is requested to made only one setup, then using “clone” button in few seconds (depending on the total
number of instruments) the configuration will be applied to all the other instruments.
In the first step you are required to made a complete setup regarding both standard and advanced section.
When you are ready, push “clone” buton.The system will propose you the following window. In the upper part
you can see information concerning the name of the instrument that the system will use as base model .
In our example we have a model XJP60 whose name is NEW_XJP60. The user can decide to apply standard
settings or advanced or both of them in one step. Moreover it is also possible to change the name of the
instruments by clicking in the field “Name”.