XWEB5000 Operation Manual
24/115
1592010600
Next window allows you to setup printers. Local or Windows Network Printers are selectable.
To obtain a list
of tested printers you should connect to
on XWEB support section or you can click
http://www.dixell.com/linea58/download/printers_XWEB.pdf
Local Printer
After selecting Local Printer you have to select a Device where the printer is physically connected.
This selection has to be done with the listbox called Device. After that, you have to select the driver for your
printer. If the model of your printer is written with black, the printer should be supported by GNU/Linux
community, otherwise if the model is written in gray the printer cannot be supported (a dialog gives you this
message).
If the model of your printer doesn‟t appear you can try to select a model that appear nearby on the
list.
Windows Network Printer
After selecting Windows Network Printer the system will perform a network printer scanning. After a
while (depending on the network dimension) the listbox will be populated and you should be able to see your
printer. If your printer is not visible on the list, you should repeat the scanning procedure otherwise the printer
is not compatible with XWEB. After that, like for local printer you have to select the driver for your printer. If the
model of your printer is written with black, the printer should be supported by GNU/Linux community,
otherwise if the model is written in gray the printer cannot be supported (a dialog gives you this message). If
the model of your printer doesn‟t appear you can try to select a model that appear nearby on the list.
2.2.4.11 XCENTER
The centralized alarm management software, automatically enables XWEB3000 to be part of the
monitored network. The user later can disable the alarm sending to the XCenter or by means of the alarm
menu he can adjust the sending procedure using the different levels of alarms available (warning: delay and
accumulation time will be considered as usual).
The XCenter SNMP can be sent through the LAN or through the Dialup by checking the option you
want. By default the SNMP trap are sent via LAN.
2.2.4.12 AUXILIARY RELAYS
Thanks to the following checkbox it‟s possible to select the polarity of the auxiliary relays and if the
auxiliary relays has to be activated with the tipology delay or not.
Summary of Contents for xweb 5000
Page 1: ...OPERATION MANUAL...
Page 2: ......
