XWEB5000 Operation Manual
32/115
1592010600
3.3.2.4
DEFROST COMMANDS
In this section you can
set-up a group of defrost
categories, then using
“time” label you can
decide different “Time
Band” events to start a
defrost. Remember time
format is 24h.
Eg: To the “Frozen food
defrost” category can
correspond the defrost
interval
07:00,
13:30,
20:00, 00:30.
With the new software release
3.0 it is possible to use the Scheduler (see §41 Scheduler) to send commands.
We strongly suggest to migrate to this new tool due to the fact that using a defrost command via category the
controller does not stop its own defrosts time table. On the contrary as long as the defrost command is sent
via Scheduler the controller stops its own defrost time table. After 20 minutes without communication between
XWEB and the controller, the latter will start its own defrost time table.
To insert a new item
Click into the field “Name” and insert the word or the words that more represents the application
Only one “Default” can be selected for this category;
Click “Insert” do include the new item into the list. Wait the screen refresh.
To modify an existing item
Select the item from the “Selection” list;
Change the “Name” description;
Click the “ Default ” if necessary;
Click on “Modify”. Wait the screen refresh.
To delete one of the item of the list
Select the item from the “Selection” list;
Click on “Cancel”;
Confirm the operation if necessary. Wait the screen refresh.
To reset all the items of the list
Click on “new”;
Wait the screen refresh.
To delete all the items of the list
Click on “Cancel All”;
Confirm the operation if necessary. Wait the screen refresh.
Defrost time table
Under the “Time” field select the hour of the first defrost that is defined in “hour:minutes”.
Select the calendar function to schedule this activity (see “Calendar”).
With no calendar enabled the activity is repeated daily following the listed defrost events.
Click on “Insert”. Wait the screen refresh.
Repeat the procedure for the other defrost events.
3.3.2.5
LIGHT COMMANDS (FOR INSTRUMENTS PROVIDED WITH THIS FUNCTION)
Summary of Contents for xweb 5000
Page 1: ...OPERATION MANUAL...
Page 2: ......