7.
If a bunch of zeros show up on this screen, then
check connections, and determine why there is
no signal from the dish to the receiver. Make sure
there are no obstructions between you and the
southern sky.
If numbers are showing up under most of the
transponders, then select Done, and it will go back
to the previous screen. Just verify that 01: Round
Dish 18”, None, Multi-switch and Dual (or Single if
you purchased the DIRECTV Non-DVR Receiver) are
still showing. Then select continue.
When it displays the Activation Screen, it’s time to
call in and have the receiver activated or hit.
8.
At this point, please DO NOT call the number
on your TV screen. Please call 1-866-900-4434.
When you speak with a DIRECTV representative,
ask them to “refresh the receiver”, provide them
with the access card number located on the
screen.
DIRECTV will then send a hit to the receiver. After
the hit comes through, the screen will change and
will go to a configuration page. Select Continue
regardless of what is shown on this screen.
19
Configuring and Activating the DIRECTV Receiver
www.TVformytruck.com/installation
