manualshive.com logo in svg

DirecTV EpicVue, Owner / Operator Installation Manual

Share
Download
DirecTV EpicVue Owner / Operator Installation Manual Download Page 20

9.

 

Displayed next is the Remote Setup Screen. 

Select Setup Remote Later. It will go through 
a “receiving channel guide” process and when 
finished please hit “Continue”.

 

10. 

Next displayed is Watch DIRECTV now popup 

menu. Select Watch DIRECTV. Verify any of the 
following channels, dependent upon the program 
purchased, channels like 206, which is ESPN 
Sports Center, 502, which is HBO, 545 Showtime, 
and 705, which NFL Sunday Ticket.

11. 

This is also a good time to verify that the DVR 

is functioning. Find an active channel, press the 
Record button on the remote, and record a few 
seconds.

Find the program you have recorded, and make 
sure it plays back. Once programming is verified, 
then the activation and setup process is complete.  

*If any screen is blank, or in the case of NFL Sunday Ticket, the DIRECTV logo is not 
showing, then please inform the DIRECTV agent.  If they are not able to resolve this issue, 
please call EpicVue at 1-866-335-9719. 

20

Configuring and Activating the DIRECTV Receiver

www.TVformytruck.com/installation

Summary of Contents for EpicVue























Reviews:

No comments

Brands by name

Popular brands

Load more brands