4.
Once you have routed the cables to the
entertainment center, connect the coax with white
writing on it to the port on the right hand side of
the Epicvue AC power box labeled Antenna.
Take the small jumper coax provided in the kit and
connect it to the port on the left of the AC power
box labeled Receiver.
Now connect the other end of the jumper coax to
the outside port labeled Input 1 on the back of the
DirecTV receiver.
5.
Only for DIRECTV DVR Receivers:
Connect the
other coax cable coming from the secondary port
on the dome to the inside port labeled Input 2 on
the back of the DIRECTV receiver. Finger-tighten
these connections, then secure them with a 7/16”
end wrench so the vibration from the truck won’t
loosen them.
Now install the power plug included with the AC
power box into the power port on the left side of
the power box and plug the other end of the cord
into your power strip.
*For more information on this, please view the
installation video on the AC Powered Dome found
on our website.
13
Connecting the Coaxial Cables
www.TVformytruck.com/installation
