Connecting the DIRECTV Non-DVR Receiver
(Sold with Basic Package)
6
This receiver only allows for one signal at a time and therefore will not allow a driver to record
one movie while watching another channel.
The installation of this receiver is the same as the DIRECTV DVR Receiver other than there
is only one coax coming into the truck and only one coax port on the receiver. Connect the
coax to the port on the right hand side of the Epicvue AC power box labeled Antenna. Take the
small jumper coax provided in the kit and connect it to the port on the left of the AC power box
labeled Receiver. Now connect the other end of the jumper coax to the coax port on the back
of the DirecTV receiver. Finger-tighten these connections, then secure them with a 7/16” end
wrench so the vibration from the truck won’t loosen them.
Configuring and activating the DIRECTV Non-DVR Receiver is the same as the DIRECTV DVR
Receiver as found in the next section. (Configuring & Activating the DIRECTV Receiver)
16
Connecting the DIRECTV Non-DVR Receiver
www.TVformytruck.com/installation
