• Make sure that you have all your items needed before beginning.
• Regulations for DOT require the height of no more than 13’6”, so
install the top of the bracket at 12’4”will set the top of the dome just
under the DOT height requirement.
• Keep dome away from any obstructions such as pipes and other truck
components.
• Use the lines of the truck to level your bracket.
• While installing these brackets, work slowly by starting with a few
threads on the bolts before securely fastening.
• Make sure the riv-nuts are securely set with impact gun set at 1100 to
1300” pounds (no higher or else the riv-nuts will overtighten or break
and risk falling out). Do not overtighten. If they are spinning, they are
not tight enough and not secure
• Cables should be positioned toward the side where the entertainment
center is.
• Be careful not to strip the bolts that fasten the bottom of the dome
and to only use the blue loc-tite 1/4”-20 short bolts. Use of the longer
1/4”-20 long bolts supplied with the rear mount will damage the
domes and void the warranty.
Key Points of the
Dome Rear Mount Install
10
*For more information on this, please view the installation video on Installing the Rear
Mount found on our website
Dome Rear Mount Installation
www.TVformytruck.com/installation
