8.
Now it’s time to put the EpicVue satellite dome
on the bracket. There are two sets of mounting
holes on the Top Pivot Plate. Use the set of holes
that allows you to get the dome as close to the
truck as possible. Fairing extensions or other
obstacles may necessitate using the outer set of
holes.
On certain models of truck it maybe necessary to
cut a cresant moon shape out of the wind fairing to
make it fit on the bracket.
9.
With the Dome sitting on the Top Plate so
that the cables are coming out towards the
passenger side of the truck, (typically where the
entertainment center is located), position the
dome so that the four holes in the Top Pivot Plate
line up with the mounting holes in the bottom of
the dome. Using the four smaller bolts with the
blue lock-tite and a lock washer, fasten the dome
to the Top Plate.
9
Dome Rear Mount Installation
www.TVformytruck.com/installation
