Installing the Local Area Antenna
(Winegard Rayzar Amplified Antenna if Purchased Separately)
8
EpicVue is also included in an off-air antenna with every system. It’s a Winegard Rayzar
amplified antenna, one of the best on the market. Install this antenna as it is by far a higher-
quality antenna than what comes on the truck. The driver will use this antenna when they want
to get their local channels.
1.
This antenna is usually placed in the top
window and secured between the window and
the window shade. Then run the cables down to
the cabinet and down to the rear of the Direct TV
receiver.
2.
Located on the back of the Direct TV receiver
is a USB port, which powers the amplifier. Plug the
separate USB cord included in the antenna box
into the USB port on the receiver then connect the
smaller end of the USB cable to the small white
box located three feet up the cable of the Rayzar
antenna. A green light should come on when the
DirecTV receiver is powered on indicating that you
have power to the amplifier for the antenna.
3.
Connect the coax cable on the end of the
antenna to the antenna in port on the back of the
TV. And tighten that down, and then secure with a
7/16 end wrench.
*If you have done this correctly, you should be getting a signal from the receiver and the
off-air antenna to the TV. If you are not getting the signal from the receiver, feel free to
review these steps or call EpicVue at 1-866-335-9719.
22
Installing the Local Area Antenna
www.TVformytruck.com/installation
