Digium, Inc.
Page 33
Chapter 3: Telephone System Configuration
The AsteriskGUI supports the following browsers:
Firefox 1.5 through 3.0
IE 7
Safari 3.x
Opera 9.x
Every page of the GUI has two columns. The left column identifies all the
elements for which you can program the Asterisk Appliance 50. The
elements listed begin with System Status, which is the first page you see
upon logon, and proceed down to Options. Clicking any of the tabs on the
left of the page opens the corresponding page in the right column. Many
pages have additional information. Click on the information symbol, a
blue “i” enclosed in a circle, to get more information about a field or page.
The System Status page is the default page. This page shows you the
current version of firmware you are using, the status of any trunk lines
you have configured, the realtime status and additional details of all user
extensions, including the new and old voicemail message count for each
user extension (e.g. Messages: new/old), and the realtime status of all
agents, conference rooms, and parked calls. You can click on most
extension definitions to get more information. In addition, the System
Status page gives you the ability to log in, log out, pause, and unpause an
agent that is associated with one or more call queues.
Note: A user extension will have the status of “Unavailable” when the
VoIP account associated with it is not registered to the Asterisk
Appliance 50. The status will not change to “Unavailable” when a user
extension has both an analog port and a VoIP account associated with
it.
In the upper right corner of each page you will see the Apply Changes
and Logout buttons. Click Apply Changes to save and activate any
