Digium, Inc.
Page 115
Chapter 3: Telephone System Configuration
party’s Caller ID will not be preserved when the call is transferred to the
destination extension.
Note: The T Option and/or t Option must be enabled under the Dial
Options tab in order for this to function.
Call Parking Feature Code
Specify the key sequence to initiate the Call Parking feature during an
active call. A default key sequence is not defined for this feature.
Initiating this feature will prompt you with the first available parking
extension. This is the number that can be dialed to retrieve the call from
the parking lot. The caller will be immediately transferred to the specified
parking extension, and the initiator of the call park will be disconnected.
In order to retrieve the call, dial the parking extension that was specified
by the Asterisk Appliance 50 prompt.
The amount of time that the call remains parked is determined by the
number of seconds specified in the Number of seconds a call can be
parked for field on the Call Parking tab. If the call is not retrieved
within this time, the call will be redirected to the user that originally
parked the call.
Note: The K Option and/or k Option must be enabled under the Dial
Options tab in order for this to function. This method of Call Parking
may also be referred to as one step parking.
Click Save when you are done configuring this section. Then click Apply
Changes to make these changes immediately available for new calls.
