Digium, Inc.
Page 26
Chapter 2: Unit Installation
9.
Connect telephones to the analog ports that are configured as FXS
ports and connect phone lines to the analog ports that are configured as
FXO ports.
10.
Using an Asterisk Appliance 50 supported web browser, open a
browser window and enter the IP address for the Asterisk Appliance
50. The default username is admin, and the password is will be the
password you chose after first logging into the Asterisk Appliance 50.
11.
You are now ready to configure your Asterisk Appliance 50 via the
GUI.
Caution.
This unit must be connected to the Telecommunications
Network in your country using an approved line cord, e.g.: for
Australia use only line cords complying with ACA Technical
Standard TS008.