Digium, Inc.
Page 114
Chapter 3: Telephone System Configuration
Disconnect Feature Code
Specify the key sequence to initiate the Disconnect feature during an
active call. The default key sequence is ‘*’.
When initiated, this feature will disconnect the active call.
Note: The H Option and/or h Option must be enabled under the Dial
Options tab in order for this to function.
Attended Transfer Feature Code
Specify the key sequence to initiate the Attended Transfer feature during
an active call. A default key sequence is not defined for this feature.
Attended Transfer may also be referred to as an announced, supervised,
consult, full-consult, or warm transfer.
Initiating this feature will prompt you to enter the destination extension
for the attended transfer. You must enter the destination extension within
a few seconds, otherwise the attended transfer will be cancelled. After
entering the destination extension within the alloted time, you will hear
ringback if the destination extension is available. If the destination
extension answers, you will be given the opportunity to announce the call
transfer. Simply hang up the phone to complete the call transfer. If you
hang up before the destination extension answers, the calling party will be
transferred to the destination extension without prior notification (i.e.
similar to blind transfer, but without CallerID preservation). If the
destination extension does not answer and you do not hang up the phone,
the attended transfer will be cancelled after 15 seconds. The calling
