Digium, Inc.
Page 126
Chapter 3: Telephone System Configuration
The LAN tab is used to specify the settings for your local network. A
local network is usually a smaller network which is part of a WAN. The
information specified here is used to access your Asterisk Appliance 50.
The default IP address specified, 192.168.69.1, is used to access the
AsteriskGUI. You can change this address to an IP address specified in
the IP start and end ranges. In most cases, the default should be used.
The Timezone tab is used to specify the default timezone for your
Asterisk Appliance 50. The time zone information is used to set the date
and time on the Asterisk Appliance 50. The time zone files are located on
the flash card which comes with your Asterisk Appliance 50. Select the
appropriate timezone from the list. Click Set as Default to set the
corresponding time zone as your default time zone. Clicking the Update
Timezones button will download and install the latest timezone files from
Digium’s website. You will need to restart your Asterisk Appliance 50 in
order to complete setting the time zone as your default. To reboot your
appliance, go to Options, Reboot, and click Reboot Now.
Note: The time zone files are named after cities that adhere to the time
zone you need.
