DigiTech DigiGate-700, User Manual

Page: 98 / 266

3 - 18 Operating Instructions
DigiGate-700
for Windows
™ ®
2. This will open the
Find Unit
screen.
Figure 3-34.
3. Enter a valid unit number in the
Unit Number
field and Click on the
OK
button to open the
Find/Edit Unit Information
window.
Figure 3-36, Page 3-19.
OR
If you want to find a tenant by last name,
click
on the
Last Name
field and enter all or part of
the tenant’s last name and click on the
OK
button.
NOTE: You can type a space in this field and
click on the
OK
button to list all tenants.
1. From the
Main Menu
, Click on the
Find
button. Figure 3-33.
Figure 3-33
Figure 3-34
Find (Finding/Editing Unit or Tenant Information)
This selection on the Main Menu is used to find tenants or units and edit the tenant information. In general,
the instructions here will follow those in the “Move In” section of this chapter.
NOTE: If the fields on this screen are dimmed grey and you cannot edit any information, the fields have
been disabled. Check the title bar of the window for the phrase “RECORD LOCKED.” If you see this, the
information on the screen may be viewed but you may not edit. The normal reason for this is that the
database record being accessed is in use in another part of the program or by another user, if you are working
on a network. If your system is not on a network, close all open windows and try to access the data again. If
this fails, close the program entirely, restart the program and try to access the record again.