manualshive.com logo in svg

DigiTech DigiGate-700, User Manual

The DigiTech DigiGate-700 is an advanced audio gate with precise control over noise reduction. Unlock the full potential of this professional tool with our comprehensive User Manual, available for free download on manualshive.com. Learn how to optimize your audio experience and make the most of this cutting-edge technology.

Share
Download
background image

H - 3

DigiGate-700

™

 for Windows

®

 - User’s Guide

DigiGate-700

for Windows

™

®

Time Activities

1. 

Time Zone Active

 - This indicates that the starting time of one of the time zones has passed and that the

input points will now operate for tenants in that time zone.  The Time Zone name appears in the 

Input

Point

 column.

2. 

Time Zone Idle

 - This indicates that the ending time of one of the time zones has passed and that the input

points will not operate for tenants in that time zone.  The Time Zone name appears in the 

Input Point

column.

3. 

Timer Op Active

 - This indicates that the starting time of one of the timer operations has passed and that

the defined operation will be performed.  An example of a timer operation is all tenants cleared from the
site at 11:59 P.M.  or all vacant units are armed at 5:00 P.M.

4. 

Timer OP Idle

 - This indicates that the ending time of one of the timer operations has passed and that the

defined operation has been performed.

Board Activities

1. 

Board Online

 - During a 

Set Controller

 the board listed under 

Input Point

 initialized correctly.  This

message applies to the Keypad board, Mux boards, or Graphics boards.

2. 

Board Offline

 - Communication to the board listed under 

Input Point

 has been lost.  This could be due to

power failure or RS485 line problems.  This message applies to the Keypad boards, Mux boards, or
Graphics boards.

3. 

Board AC Power Fail

 - The Keypad board, Mux board, Graphics board, or other RS485 device listed

under 

Input Point

 has lost its main power source and is running under backup power.  This message

occurs only if the board has a battery backup.

4. 

Board AC Power Restored

 - The Keypad board, Mux board, Graphics board, or other RS485 device listed

under 

Input Point

 has regained its main power source and is no longer running under backup power.  This

message occurs only if the board has a battery backup.

5. 

Board Battery Fail

 - The Keypad board, Mux board, Graphics board, or other RS485 device listed under

Input Point

 has lost its backup power source.  This message occurs only if the board has a battery backup.

You should contact your installer or our service department for a new battery.

6. 

Tamper Closed

 - This message only appears when the optional Tamper Switch has been installed on a Mux

box.  The message indicates that the box is secure.

7. 

Tamper Open

 - When the optional Tamper Switch has been installed on a Mux box, this message indicates

that the box is not secure and has been opened.  On a system that does not have the Tamper Switch
installed, this message will appear right after the Board Online message and has NO significant meaning.

Summary of Contents for DigiGate-700











































































































































































































































































Reviews:

No comments

Related manuals for DigiGate-700

HID iCLASS SE R90 Installation Manual preview
iCLASS SE R90
Brand: HID Pages: 10
A&D GXA-25 Instruction Manual preview
GXA-25
Brand: A&D Pages: 16
K&K Sound PURE PIANO Product Manual preview
PURE PIANO
Brand: K&K Sound Pages: 2
Feig Electronic multijob-Reader OBID ID RWA02.10-A Installation Manual preview
multijob-Reader OBID ID RWA02.10-A
Brand: Feig Electronic Pages: 31
Dreamline FLEX 42x72" Installation Instructions Manual preview
FLEX 42x72"
Brand: Dreamline Pages: 43
Hydro EvoWash User Manual preview
EvoWash
Brand: Hydro Pages: 33
Nilfisk-Advance S105 Series Directions For Use Manual preview
S105 Series
Brand: Nilfisk-Advance Pages: 16
Viking VS-12BL User Manual preview
VS-12BL
Brand: Viking Pages: 4
Craftsman CMXGPAM1080053 Instruction Manual preview
CMXGPAM1080053
Brand: Craftsman Pages: 36
Body Armor 4x4 PRO-Series Installation Instructions preview
PRO-Series
Brand: Body Armor 4x4 Pages: 3
Body Armor 4x4 ECO-SERIES User Manual preview
ECO-SERIES
Brand: Body Armor 4x4 Pages: 6
Geuther 2732 Manual preview
2732
Brand: Geuther Pages: 18
GAI-Tronics 10439-102 Manual preview
10439-102
Brand: GAI-Tronics Pages: 4
Jacuzzi Mynima 80 Sphere TT Instructions For Preinstallation preview
Mynima 80 Sphere TT
Brand: Jacuzzi Pages: 40
Painless 60608 Installation Manual preview
60608
Brand: Painless Pages: 52
Oemtools 24567 Operating Instructions And Parts Manual preview
24567
Brand: Oemtools Pages: 8
Warner Electric 5219 Series Installation & Operation Instructions preview
5219 Series
Brand: Warner Electric Pages: 20
Tamiya TRF417 User Manual preview
TRF417
Brand: Tamiya Pages: 28

Brands by name

Popular brands

Load more brands