Digital Watchdog Vmax960-16 User Manual Download Page 44

Page: 44 / 157

43 | Chapter 1 : DVR User Manual

4.2

Device

There are Seven sub menus in the Device menu, such as Camera, Audio, Sensor, Motion Alarm, Extra Alarm, and PTZ.

Users can easily move to the “Device” menu by selecting the icon

on the top right of the menu screen.

4.2.1 Camera

Users can setup camera title, covert, brightness, contrast, motion sensitivity, and audio mapping for each camera.

“Covert,” also called “hidden camera” feature, hides camera display and playback as if there were no camera recording.

Users can apply this covert function not only to Live view, but also to Playback view.

The default motion area setup is the entire camera area.

See section 3.3.2 5x Signal Extender (Built-in 4CH) for more information.

Summary of Contents for Vmax960-16






























































































































































Search results

Summary of Contents for Vmax960-16

Reviews:

Brands by name

Popular brands

Digital Watchdog Vmax960-16, User Manual

Search results

Summary of Contents for Vmax960-16

Reviews:

Brands by name

Popular brands