Digital Watchdog Vmax960-16 User Manual Download Page 101

Page: 101 / 157

User’s Manual | 100

7.4.7 Search Panel

The Search Panel is only available in search mode.

The Search panel displays the record information for each channel from a date selected in the calendar panel.

Each color represents a different recording mode:

No Record White

Continuous (Yellow Color)

Panic(Red Color)

Alarm(Orange Color)

Motion(Green Color)

To jump to a specific time in the playback using the Search Panel:

1. Click the time or move the time bar to the time you want to playback in the search panel.

2. To “zoom-in” to an hour in the Search Panel, doubl-click on the desired hour. The display time at the top of the Search

Panel will display in minutes interval all 60 minutes of that selected hour. Time will be displayed in 5 minute spaces.

7.4.8 Playback control panel

No.

Button

Description

Go to First available data

Forward Playback : Decrease the speed
Reverse Playback : Increase the speed

Step Backward

Reverse Playback

Pause

Forward Playback

Step Forward

Forward Playback : Increase the speed
Reverse Playback : Decrease the speed

Go to Last available data

Summary of Contents for Vmax960-16






























































































































































Search results

Summary of Contents for Vmax960-16

Reviews:

Related manuals for Vmax960-16

Brands by name

Popular brands

Digital Watchdog Vmax960-16, User Manual

Search results

Summary of Contents for Vmax960-16

Reviews:

Related manuals for Vmax960-16

Brands by name

Popular brands