Digital Watchdog MEGApix DWC-MPTZ336XW User Manual Download Page 19

Page: 19 / 83

Users

User access control is enabled by default. The administrator can set up other users, by giving

user names and passwords. It is also possible to allow anonymous viewer login, which means

that anybody may access the Live View page, as described below:

The user list displays the authorized users and user groups (levels):

User Group

Authority

Guest

The lowest level of access, which only allows access to the Live

View page.

Operator

View the Live View page, create and modify events, and adjust

certain other settings. Operators have no access to System

Options.

Administrato

An administrator has unrestricted access to the Setup tools

and can determine the registration of all other users.

Enable anonymous viewer login: Check the box to use the webcasting features. Refer to

“Video and Image > Webcasting” for more details.
Please refer to “System > Security > Users” for more details about User setup.

Summary of Contents for MEGApix DWC-MPTZ336XW




















































































Search results

Summary of Contents for MEGApix DWC-MPTZ336XW

Reviews:

Related manuals for MEGApix DWC-MPTZ336XW

Brands by name

Popular brands

Digital Watchdog MEGApix DWC-MPTZ336XW, User Manual

Search results

Summary of Contents for MEGApix DWC-MPTZ336XW

Reviews:

Related manuals for MEGApix DWC-MPTZ336XW

Brands by name

Popular brands