Digital Watchdog MEGApix DWC-MPTZ336XW User Manual Download Page 33

Page: 33 / 83

OSD

This camera provides four OSD’s (on-screen display) on each stream. Users can drag “OSD

Title”, “OSD Subtitle”, “Date and Time” and “PTZ Function” to the desired position and check

at the preview window.

• Video Preview: Users can check the position of OSD on actual video via the preview

popup window.

• OSD Setting: Users can select show or hide OSD for each stream. Also, the user can set

the transparency level of OSD by slide bar or type in a number.

• OSD Color: User can change OSD color by type in.
• OSD Title: User can show or hide OSD Title/Subtitle, and can change OSD Title/Subtitle

by type in. The default of OSD Title is the model name of the camera

• Date and Time: User can show or hide date and time on OSD.
• PTZ: User can show or hide the PTZ Function/Position on OSD.

NOTE: The change in this page immediately affects the video stream.

Summary of Contents for MEGApix DWC-MPTZ336XW




















































































Search results

Summary of Contents for MEGApix DWC-MPTZ336XW

Reviews:

Related manuals for MEGApix DWC-MPTZ336XW

Brands by name

Popular brands

Digital Watchdog MEGApix DWC-MPTZ336XW, User Manual

Search results

Summary of Contents for MEGApix DWC-MPTZ336XW

Reviews:

Related manuals for MEGApix DWC-MPTZ336XW

Brands by name

Popular brands