Digital Projection lightning series, User Manual

Page: 101 / 156

Header Action Implication
16 Sets projector’s colour clip As above, however it only affects
saturated colours and the projector must
be re-started to take effect.
17 Sets engineering password Could effectively disable colour balance,
colour clip and projector password
changes via zapper if new password not
written down or remembered. Note there
is no confirmation of new password, and
changes happen immediately.
18 Sets Projector address Could lead to subsequent messages being
sent to the wrong projector. May also
effectively disable remote control.
19 Sequences addresses As above, but work on all projectors
connected in a chain. Potentially
catastrophic if projectors already
arranged in groups.
20 Set to value Care should be taken in selecting start up
mutes and preset channel number in case
either result in black display on start up.
21 Save settings This saves settings to memory which are
currently in the revised buffer and not
necessarily the current displayed image.
22 Previous settings This will use the settings in the previous
buffer to display an image.
23 Revised settings This will use the settings in the revised
buffer to display an image.
C—51
System Operation
OPERATION
LBV00056; Revision C - 01/03/03