Digital Projection lightning series, User Manual

Page: 47 / 156

B—15
System Installation
INSTALLATION
LBV00056; Revision C - 01/03/03
The Image Parameter controls on the remote can be used when in the Menu
system providing that no data fields are being edited.
The adjusted parameter settings for an input device can be saved to a 'channel'. A
channel setting also stores the input source address (see storing system
configurations, B—15, for more information). This allows you to use the input
device at a later date without having to reconfigure the parameters to achieve the
desired image. The channel is selected in the Channel Set-up menu or by using the
remote. The source image is then displayed on screen.
LENS CONTROL
All 20 series models are fitted with a motorised lens mount as standard and have
picture control features available via the remote control in the form of Focus and
Lens Shift. These features are operated via the LENS button (see System Operation,
C—4) and allow the user to either adjust the image Focus and/or adjust the horizon-
tal and vertical positioning of the displayed image relative to the projector. The
LENS button also includes a menu item for Zoom for future use.
ON SCREEN DISPLAY (OSD)
The On Screen Display (OSD) displays the system menus and messages. The OSD
will come on automatically at power-up if it is preset in User Preferences Menu.
Alternatively it can be activated by the OSD ON remote control button.
MENU SYSTEM
The main menu provides access to dialogue boxes which allow you to control the
projector and to view system settings. If the OSD is set or switched to 'OFF' the
menu system and messages will not be displayed on screen.
✍