Digital Projection lightning series, User Manual

Page: 67 / 156

System Operation
OPERATION
LBV00056; Revision C - 01/03/03
COPY Command
The COPY command allows all or just selected parameters from a channel to be
copied to another channel. To copy a channel, highlight it with the cursor in the
Channel Set-up menu and select the COPY command. This displays the Copy
Channel screen containing three main fields: Copy From, Copy To and Copy
Parameters.
Copy From - displays the name and number of the channel to be copied.
Copy To - displays the name and number of the destination channel.
Copy Parameters - allows copying of all or selected channel parameters.
To select a destination channel, place the cursor over the Copy To field and press
'ENTER'. Scroll through the flyout list using the
and buttons until the desired
channel is highlighted and press 'ENTER'. The name and number of the channel
will appear in the Copy To field. If a blank channel is selected it can be named at
this point by placing the cursor over the name field and pressing 'ENTER'. The field
will then be in Data Edit mode allowing a name to be entered.
C—17
S E L E C T V I E W C O P Y N E W M O D I F Y D E L E T E
B
B
7
C O P Y C H A N N E L
C o p y F r o m 1 N a m e V I D E O ( R G B )
C o p y T o - - N a m e - - - - - - - - - - - - - -
C o p y P a r a m e t e r s
A l l S e l e c t e d
I n p u t C o n f i g S a t u r a t i o n
S i z e & P o s i t i o n S h a r p n e s s
C o l o u r T e m p H u e
S w i t c h e r S o u r c e
B r i g h t n e s s
C o n t r a s t
C A N C E L O K