Digital Projection lightning series, User Manual

Page: 21 / 156

A—7
0verview
OVERVIEW
LBV00056; Revision C - 01/03/03
Hard-Wired Remote Control Connection
The hard-wired control of the projector is made using the Remote Control Unit with
a cable connection directly to the projector.
The cable connects between the 3.5mm stereo jack on the remote control using the
screw locking mini jack plug and the XLR connector on the projector.
The remote control does not require batteries when directly connected to the pro-
jector. The connection to the projector may be extended using industry-standard
audio XLR extension cables between the XLR on the projector and the hard-
wired remote cable. The total cable length should not exceed 100m (330ft).
For further information on the hard-wired remote adapter wiring, see Cables and
Connections, D—28.
✍