background image

IMPORTANT SAFEGUARDS

PRE FITTED MAINS PLUGS

WARNING:

For your convenience a mains plug has been fitted to this appliance. For your safety please
observe the following information.
1. Should the fuse in the plug fail, remove the plug from the wall socket and replace the fuse with

a 3 Amp ASTA approved to BS 1362 fuse.

2. Never use the plug without the fuse cover fitted. Replacement fuse covers are available from

your dealer or most electrical retail outlets.

3. If the mains plug is cut off the cable, rewire the replacement plug in accordance with

instruction given in this manual.

4. CAUTION: Under no circumstances should the discarded plug be inserted mains socket. To

prevent a shock hazard carefully dispose of the discarded plug. Do not leave the plug lying
around where children might see it.

To prevent fire or shock hazard do not expose this unit to rain or moisture.

CAUTION:

DANGEROUS VOLTAGES EXIST INSIDE THIS UNIT, DO NOT REMOVE COVER

(OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL. DISCONNECT FROM MAINS SUPPLY
WHEN NOT IN USE.

PLUG WIRING DETAILS

The wires in this mains lead are coloured in
accordance with the following wiring codes:
Blue................................................. Neutral
Brown................................................... Live
The wires in this mains lead must be
connected to the terminals in the plugs as
follows:
Blue Wire..................................... N or Black
Brown Wire..................................... L or Red
Only a 3 Amp fuse should be fitted in the plug
or a 5 Amp fuse at the distribution board.

This symbol means that this unit is double insulated.
An earth connection is not required.

WARNING:

UNDER NO CIRCUMSTANCES MUST THE LIVE OR NEUTRAL WIRES BE
CONNECTED TO THE EARTH TERMINAL IN A 3-PIN MAINS PLUG.

FUSE

E

L

N

BROWN

CORD
GRIP

BLUE

Instruction Manual

For improvement purposes, specification and design are subject to change without notice.

Goodmans Product Information Helpline

0870 873 0080

www. goodmans.co.uk

GPS219PLLR

STEREO RADIO CASSETTE RECORDER

COMPACT DISC PLAYER

Summary of Contents for GPS219PLLR











Reviews: