Page 2.12
Rev D July 2014
2. Installation
Digital Projection
HIGHlite Cine 260, 1080p 330
User Manual
Notes
Make sure the rear lens cap is
removed, before fitting the lens.
Be careful not to scratch
the lens surfaces. If you do
accidentally touch a lens, then
clean the surface using a lens
paper.
Fitting the lens
•
Remove the two screws securing the front cover to the body of the projector.
•
Push the front cover downwards, then pull it away from the projector.
•
Push down the lens holder tab.
•
Hold down the tab, and insert the lens into the lens aperture, making sure that
the plug on the zoom drive mechanism lines up with the socket on the right of
the lens aperture.
securing
screw
securing
screw
lens
holder tab
