Rev D July 2014
Page 4.5
Digital Projection
HIGHlite Cine 260, 1080p 330
User Manual
4. Controlling the projector
The remote control
Layout
Timeout
There is a 5 second timeout for the
control
keys at the bottom of the remote control:
- after 5 seconds, if no adjustment has been made, the indicator will go out and
the adjustment key must be pressed again.
- to end the adjustment before 5 seconds has elapsed, press a different
adjustment key, or press the key again.
There is a 30 second timeout for the
menu navigation
keys.
Menu
navigation
keys
Control keys
Transmit
indicator
Notes
Many features are controlled
from the menus using the
menu
navigation keys
on the remote
control or the projector control
panel.
For more information about
using the menus, see later in
this section,
Using the menus
.
Some of the menu features,
for example brightness,
contrast and sharpness, can
be accessed directly using the
control keys
at the bottom of
the remote control.
For more information about
using the control keys, see
later in this section,
Using the
control keys
.
In most situations, you can
simply point the remote control
at the screen which will reflect
the IR signal from the remote
back toward the receiver on the
projector.
In some cases, however,
ambient conditions may prevent
this. In this case, point the
remote control directly at the
projector.
Remote reception angle
40°
40°
