Rev D July 2014
Page 4.13
Digital Projection
HIGHlite Cine 260, 1080p 330
User Manual
4. Controlling the projector
Input Select
•
Press ENTER or SELECT.
The
Input select
submenu will appear:
•
Use the
and
keys to select from:
HDMI 1
HDMI 2
RGB
Component 1
Component 2
Video
S-Video
•
Press ENTER or SELECT, to select a different input source.
•
To return to the
Main menu
, press
once.
Resync
If the image has become unstable or degraded, it may be possible to improve the
display:
•
Press ENTER or SELECT.
The projector will attempt to re-synchronise to the current input source.
Notes
To select a different menu,
press MENU
once or
twice, so that no items are
highlighted, then use the
and
keys to select a
different page
.
To exit from the menus
completely, you may need to
press
up to three times.
Image changes made using
the menus will take effect
immediately.
Some menu items may be
greyed out - unavailable due to
the effect of settings made in
other menus, or due to the type
of input signal.
If you select a source that IS
connected and active, the
projector will automatically
adjust to the parameters of the
signal, and display it.
If you select a source that is
NOT connected or active, the
projector will continue searching
through the input sources until it
finds a valid signal, in this order.
HDMI 1, HDMI 2, RGB,
Composite 1, Composite 2,
Video, S-Video, HDMI 1...
Main menu continued
