Page 5.4
Rev D July 2014
5. Maintenance
Digital Projection
HIGHlite Cine 260, 1080p 330
User Manual
Cleaning or replacing the air filter
•
Turn the power OFF and allow the lamp to cool for 5 minutes.
•
Unscrew the two cross-head screws securing the filter cover to the projector
•
Remove the cover and the filter.
•
Clean the filter using clean water, or replace it with a new filter.
•
Allow the filter to dry before reuse.
•
Replace the filter, pushing it firmly into place.
•
Refit the filter cover.
Notes
Always switch the projector
OFF before cleaning the filter.
Always allow the lamp to cool
for 5 minutes before:
- disconnecting the power
- moving the projector
- changing the lamp
- cleaning the fans and filter
The filter should be cleaned
regularly:
•
In a clean environment such as
an office, after 500 hours.
•
In a dusty or smoky
environment such as a theatre
or public area, more frequent
cleaning may be necessary.
Allow the filter to dry before
reuse.
If the filter is broken, then
replace it.
