Rev D July 2014
Page 4.27
Digital Projection
HIGHlite Cine 260, 1080p 330
User Manual
4. Controlling the projector
Trigger 1 & 2
The Trigger 1 and Trigger 2 outputs are interchangeable:
Screen trigger
:
can be connected to an electrically operated screen,
automatically deploying the screen when the projector
starts up, and retracting the screen when the projector
shuts down.
Aspect Ratio trigger
: can be used to control screen shuttering for different
aspect ratios
•
For each
Trigger setting
, use the
and
keys to select from:
Screen
trigger occurs when the projector is in RUNNING mode
16:9
trigger occurs when 16:9 aspect ratio is selected
Theaterscope
trigger occurs when Theaterscope aspect ratio is selected
4:3
trigger occurs when 4:3 aspect ratio is selected
4:3 Narrow
trigger occurs when 4:3 Narrow aspect ratio is selected
RS232
trigger output follows the
On
or
Off
setting specified in a
trig.1
or
trig.2
command received from a PC via the LAN or RS232 serial
input.
Auto Source
•
Use the
and
keys to select from:
On
projector searches for an alternative input source when the current
input source is disconnected
Off
projector shows a ‘blank’ screen when the current input source is
disconnected.
Control menu continued
Notes
To select a different menu,
press MENU
once or
twice, so that no items are
highlighted, then use the
and
keys to select a
different page
.
To exit from the menus
completely, you may need to
press
up to three times.
For more information about
the trigger output, see
Control
connections
in
section
6. Appendix
.
To set what a ‘blank’ screen
looks like, use the
Blank
Screen
setting in the
System
menu
.
