Page 4.24
Rev D July 2014
4. Controlling the projector
Digital Projection
HIGHlite Cine 260, 1080p 330
User Manual
Notes
To select a different menu,
press MENU
once or
twice, so that no items are
highlighted, then use the
and
keys to select a
different page
.
To exit from the menus
completely, you may need to
press
up to three times.
Once the IR Sensor has been
disabled, it can be re-enabled
by using the control keys, or by
sending a remote command via
RS232 or LAN.
For more information about
remote commands, see
Remote communications
protocol
in
section
6. Appendix
.
Control menu
•
To display the menus, press MENU
on the remote control or the projector
control panel.
•
Use the
and
keys to select the
Control menu
page,
•
To select a menu item, use the
and
keys until the item is highlighted.
IR Sensor
•
Use the
and
keys to select from:
On
the remote control is enabled
Off
the remote control is disabled
Projector Control
•
Use the
and
keys to select from:
Network
the projector can be controlled by remote commands from the
LAN input
RS232
the projector can be controlled by remote commands from the
RS232 input
